2011 Kawasaki Mule 600

2011 Kawasaki Mule 600 - Specifications
American MSRP $6,699 USD
Canadian MSRP $NA CDN
Engine: Four-stroke, air-cooled single
Displacement: 401cc
Bore x Stroke: 82 x 76mm
Compression ratio: 8.3: 1
Carburetor: Nikki 6C1026
Air filter: Snorkel-type with two-stage dry replaceable element
Oil filter: Automotive-type spin-on canister
Ignition: Magneto and transistor
Electrical: 12VDC, 14 amp-hour battery, alternator
Transmission: Kawasaki Automatic Power-Drive System (KAPS), with reverse
Final drive: Shaft, dual-mode rear differential

Exhaust: Muffler with USFS-approved spark arrestor
Front Tire Size: 22x9-10 tubeless
Rear Tire Size: 22x11-10 tubeless
Front suspension / wheel travel: MacPherson strut / 3.1 in.
Rear suspension / wheel travel: Unit swing axle, adjustable shocks / 3.1 in.
Steering: Rack and pinion
Brakes: Four-wheel hydraulic drum
Fuel capacity: 4.1 gallons
Curb weight: 954 lbs.
Overall length: 108.8 in.
Overall width: 52.6 in.
Overall height: 70.1 in.
Wheelbase: 70.0 in.
Ground clearance: 6.1 in.
Roll over protective structure (ROPS): This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement
Cargo bed dimensions (LxWxH): 41.1 x 35.4 x 9.6 in. / 8.08 cu. ft.
Cargo bed capacity: 400 lbs.
Load capacity: 926 lbs.
Towing capacity: 1,100 lbs.
Turning radius: 10.8 ft.
Top speed: 25 mph, governed
Instruments: Hour meter, 35w headlights, taillight and stoplight
Color Choices: Dark Royal Red
Warranty: 12 Months
Good Times™ Protection Plan: 12 or 24 months