2010 Kawasaki Mule 610 4X4

2010 Kawasaki Mule 610 4X4 - USA Specifications
US MSRP* $7,299 USD
Engine Four-stroke, air-cooled single

Displacement 401cc

Bore x Stroke 82 x 76mm

Compression ratio 8.6:1

Carburetor Nikki 6C1026

Air filter Snorkel-type with two-stage dry replaceable element

Oil filter Automotive-type spin-on canister


Ignition Magneto and transistor

Electrical 12V DC, 14 amp-hour battery, alternator

Transmission Continuously variable transmission with high and low range, plus reverse

Final drive Shaft-driven selectable four-wheel drive, dual-mode rear differential

Exhaust Muffler with USFS-approved spark arrestor

Front Tire Size 24x9-10 tubeless

Rear Tire Size 24x11-10 tubeless

Front suspension / wheel travel MacPherson strut / 3.1 in.

Rear suspension / wheel travel Unit swing axle / 3.1 in.

Steering Rack and pinion

Brakes Four-wheel hydraulic drums, triple sealed

Fuel capacity 4.1 gal.

Dry weight 1,010 lbs.

Overall length 108.8 in.

Overall width 52.6 in.

Overall height 70.9 in.

Wheelbase 70.0 in.

Ground clearance 6.7 in.

Roll over protective structure (ROPS) This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement

Cargo bed dimensions (LxWxH) 41.1 x 35.4 x 9.6 in. / 10.9 cu. ft.

Load capacity 926 lbs.

Cargo Bed Capacity 400 lbs.

Towing capacity 1,100 lbs.

Turning radius 10.8 ft.

Top speed 25 mph, governed

Instruments Oil temperature meter, hour meter, 35w headlights, taillight and stoplight

Color Choices Dark Royal Red, Smoky Blue

Warranty 12 Months

Good Times™ Protection Plan 12 or 24 months